www.cpflight.com
Home
Products
News
Purchase
Downloads
Links
Help
Compatibility
FAQ
Customer's Cockpit
Forum
Contact
Last Updated:
Oct 01, 2008
Privacy Policy
Affiliates:
Frequently Asked Questions
I have installed the software and I turned then in the configuration program. There are many settings about MCP and I don't know how and what I have to configure to use it with FS.
I'm very interested to connect warning lights to the expansion port of the MCP. What can I do exactly?
I have wired some external input/output on the MCPEX1 board. Controls works running FS_COM and FS, but when I run Project Magenta controls have not effect.
I have wired potentiometers on the MCPEX1 board to control engine throttles; controls seems to works correctly in the MCP_CONF programs (current position indicator move according to the inputs), but they have not effect on FS throttle levers.
is the equipment ok for FS2004?
…plug it in a USB port, and it works on 2004; no extra (payware) software needed or extra hardware?
…but one question: how can I lighten up the background lighting?
I would like to use a digital output of the MCPEX1 board to drive an A/T disengage warning light. I didn’t found that function in the assignments drop-down list. What to do?
The EFIS-Panels running very good and looks very pretty. Only one problem, if I adjust for example ND-Range on the EFIS-Panel to 20 NM, it apear 10 NM in the ND! In the MCP window of Project Magenta stand the button on 20 Nm too that is correct but in the ND apear 10Nm
when I run fs_com I recieve the following errors: DIGITAL INPUT CONFIGURATION FILE NOT FOUND ANALOG INPUT CONFIGURATION FILE NOT FOUND DIGITAL OUTPUT CONFIGURATION FILE NOT FOUND ANALOG OUTPUT CONFIGURATION FILE NOT FOUND PREFERENCES FILE NOT FOUND what to do?
