www.cpflight.com
Home
Products
News
Purchase
Downloads
Links
Help
Compatibility
SDK
Customer's Cockpit
Forum
Contact

 
Last Updated:
Nov 15, 2011
 
 
Privacy Policy
 
 
Affiliates:
www.flyengravity.com

www.projectmagenta.com

www.prosim737.com

http://www.iflysimsoft.com/index.aspx

http://www.cockpitsolutions.com/

http://www.aerosoft.com.au/home/home.html

www.flightsimlabs.com

http://www.feelthere.com/2005/fcu.html

www.airsimtech.com

www.flightdecksoftware.com

www.sim-avionics.com www.xesasystems.com www.X-plane.com

www.fsinsider.com ww.microsoft.com/games
 
 
 
 
 
 
PMDG compatibility
 


Last driver and firmware that support PMDG737/747 for fs2004.
 

MCP737USB & MCPRS232 Software and Firmware
Description Rev. Downloads
CPflight Configurator and driver (only for FS2004 users) 3.03 cpflighttools303.zip
CPflight Configurator and driver upgrade (only for FS2004 users)
Unzip and copy the 3 files compressed into fs_com_306.zip file into cpflight folder,
cpflighttools303 have to be already installed. 		3.06 fs_com_306.zip
MCP737 firmware (for USB and RS232 version)
( not suitable for MCP737PRO and FCU320 )
( Read enclosed instruction before proceed ) 		2.08 mcpfw208.zip
 


PMDG is supported using key-strokes and partially using FSUIPC offset. Follow there is a list of keyboard that i have tested and that give any problem on different tipe of keyboard. Please open FS menu bar open PMDG-->General-->Keyboard Command and compare the assignement follow with yours. I there are difference please change your configuration with my configuration.
  • MCP Press APDISCON = Z
  • MCP Press AT = Shift + R
  • MCP Press N1 = Ctrl + Shift + N
  • MCP Press SPD = Ctrl + M
  • MCP Press CO = Shift + I
  • MCP Press LVLCHG = Ctrl + I
  • MCP Press VNAV = Ctrl + V
  • MCP Press LNAV = Ctrl + N
  • MCP Press VORLOC = Ctrl + O
  • MCP Press APP = Ctrl + A
  • MCP Press HDGSEL = Ctrl + H
  • MCP Press ALTHLD = Ctrl + Z
  • MCP Press VS = Ctrl + P
  • MCP Press CMD L = A
  • MCP Press CMD R = Shift + F4
  • MCP Press CWS L = Ctrl + F4
  • MCP Press CWS R = Ctrl + Shift + F4
  • MCP Press FD L = Ctrl + F
  • MCP Press FD R = Ctrl + Shift + F3
  • MCP Increase Bank Limiter = Ctrl + Shift + L
  • MCP Decrease Bank Limiter = Ctrl + F11
  • MCP Increase Course = Shift + F3
  • MCP Decrease Course = Ctrl + F5
  • MCP Increase Altitude = Ctrl + Shift + Z
  • MCP Decrease Altitude = Ctrl + F2
  • MCP Increase Speed = Ctrl + Shift + V
  • MCP Decrease Speed = Shift + F11
  • MCP Increase Heading = Ctrl + Shift + H
  • MCP Decrease Heading = Ctrl + F8
  • MCP Increase VS = Ctrl + Shift + P
  • MCP Decrease VS = Ctrl + Shift + F11
  • MCP Press SPD INTV = Ctrl + Tab + S ( use only this assignement )
  • MCP Press ALT INTV = Ctrl + Tab + A ( use only this assignement )
  • MCP Set TOGA = Ctrl + Shift + G
  • MCP Reset TOGA = Ctrl + Shift + F12 ( use only this assignement )
  • EFIS Press Mins = Shift+Tab+M
  • EFIS Increase Mins = Ctrl+shift+M
  • EFIS Decrease Mins = Shift + F12
  • EFIS Reset Mins = Ctrl+Shifht+Tab+M
  • EFIS Press Baro = Shift+Tab+B
  • EFIS Increase Baro = Ctrl+shift+B
  • EFIS Decrease Baro = Shift + B
  • EFIS Reset Baro STD = Ctrl+Shifht+Tab+B
  • EFIS Press FPV = Ctrl+Shift+Tab+V
  • EFIS Press MTRS = Ctrl+Shift+Tab+R
  • EFIS Increase NavL = Ctrl+shift+1
  • EFIS Decrease NavL = Ctrl+Tab+1
  • EFIS Increase NavR = Ctrl+shift+2
  • EFIS Decrease NavR = Ctrl+Tab+2
  • EFIS Increase ND Mode = Ctrl+Tab+F12
  • EFIS Decrease ND Mode = Shift+Tab+F12
  • EFIS Press ND Mode CTR = Ctrl+Shift+Tab+F12
  • EFIS Increase ND Range = Ctrl+Tab+F11
  • EFIS Decrease ND Range = Shift+Tab+F11
  • EFIS Press ND Range TFC = Ctrl+Shift+Tab+F11
  • EFIS Press WXR = Ctrl+Shift+Tab+5
  • EFIS Press STA = Ctrl+Shift+Tab+6
  • EFIS Press WPT = Ctrl+Shift+Tab+7
  • EFIS Press ARPT = Ctrl+Shift+Tab+8
  • EFIS Press DATA = Ctrl+Shift+Tab+9
  • EFIS Press POS = Ctrl+Shift+Tab+3
  • EFIS Press TERR = Ctrl+Shift+Tab+4
  • Dec Autobrake = Ctrl+Tab+W ( use only this assignement )
  • Inc Autobrake = Shift+Tab+W ( use only this assignement )


    • If not correspondig, close FS_COM and change yours assignement. After this changes run again FS_COM.exe

    Very important test to make before contact CPflight support mail box

    Check if when the MCP starts the hardware have the same value diplayed on PMDG MCP.

    Example:

    Test 1:Load a PMDG flight and set HDG value = 210 and altitude value = 15000.

    Run FS_COM and compare the HDG and Altitude value between PMDG MCP and CPflight MCP.

    If the value are different please close FS_COM and run MCP_CONF and change the PMDG switch ( "PMDG rel 1.3" or "PMDG later Version"). Save the new setting and close MCP_CONF.

    Repeat Test1.

    When you contact CPflight mail box you have to provide the report of this test.

    If this report will not be provided the mail will not be considered.

    Important note:
    - Before run the cpflight driver FS_COM load PMDG737 aircraft.

    - The hardware send the command to FS_COM driver. After that the program ( FS_COM ) analize the command and send back the flight status ( button led and display value ) to the hardware, so all led status and all control logic depends by FS_COM software.
 
top